Jan 25, 2012 #1 S SolaiKannan Junior Member level 1 Joined Jan 19, 2012 Messages 19 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,401 i am using winpic 800 software. and for downloading the program i was unable to erase the program. is there settings to be changed for it
i am using winpic 800 software. and for downloading the program i was unable to erase the program. is there settings to be changed for it
Jan 25, 2012 #2 A ard Full Member level 5 Joined May 3, 2009 Messages 251 Helped 52 Reputation 104 Reaction score 50 Trophy points 1,308 Location Mumbai, India Activity points 2,783 What hardware are you using? Is your Winpic 800 configured for that particular hardware? Anand
Jan 25, 2012 #3 H hamed8419215 Member level 5 Joined Mar 3, 2010 Messages 86 Helped 26 Reputation 52 Reaction score 26 Trophy points 1,298 Location mashhad Activity points 1,795 if the PIC18f452 is detected by WINPIC800, then you should check VPP and VDD. VPP should be about 13V and VDD should not be under 4V.
if the PIC18f452 is detected by WINPIC800, then you should check VPP and VDD. VPP should be about 13V and VDD should not be under 4V.
Jan 25, 2012 #4 S SolaiKannan Junior Member level 1 Joined Jan 19, 2012 Messages 19 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,401 this is the setting i have set in winpic800. if there is any correction do tell me. ---------- Post added at 15:38 ---------- Previous post was at 15:29 ---------- can i supply 12v for vpp and 5v for vdd
this is the setting i have set in winpic800. if there is any correction do tell me. ---------- Post added at 15:38 ---------- Previous post was at 15:29 ---------- can i supply 12v for vpp and 5v for vdd
Jan 25, 2012 #5 H hamed8419215 Member level 5 Joined Mar 3, 2010 Messages 86 Helped 26 Reputation 52 Reaction score 26 Trophy points 1,298 Location mashhad Activity points 1,795 the setting seems to be OK. VPP and VDD supplied by programmer and you can not control them manually. which programmer do you use?
the setting seems to be OK. VPP and VDD supplied by programmer and you can not control them manually. which programmer do you use?
Jan 25, 2012 #6 S SolaiKannan Junior Member level 1 Joined Jan 19, 2012 Messages 19 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,401 i am programming using microcode studio.
Jan 25, 2012 #7 A ard Full Member level 5 Joined May 3, 2009 Messages 251 Helped 52 Reputation 104 Reaction score 50 Trophy points 1,308 Location Mumbai, India Activity points 2,783 Can you tell us what programmer hardware you are using? Parallel port based, serial port based? And which one, specifically. You need to configure Winpic800 to drive that particular hardware.
Can you tell us what programmer hardware you are using? Parallel port based, serial port based? And which one, specifically. You need to configure Winpic800 to drive that particular hardware.
Jan 25, 2012 #8 H hamed8419215 Member level 5 Joined Mar 3, 2010 Messages 86 Helped 26 Reputation 52 Reaction score 26 Trophy points 1,298 Location mashhad Activity points 1,795 microcode studio is your compiler, what is your programmer hardware? does the programmer detect PIC18F452 (specially at WINPIC800 start up)?
microcode studio is your compiler, what is your programmer hardware? does the programmer detect PIC18F452 (specially at WINPIC800 start up)?
Jan 26, 2012 #9 S SolaiKannan Junior Member level 1 Joined Jan 19, 2012 Messages 19 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,401 ok thank you to all for your help, now i was able to erase it. my hardware is serial port and it was detected by winpic800 during start up.
ok thank you to all for your help, now i was able to erase it. my hardware is serial port and it was detected by winpic800 during start up.