[General] problem| cannot send email by AT-commands sim900

Code C - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
#include "SIM900.h"
#include <SoftwareSerial.h>
//#include "inetGSM.h"
//#include "sms.h"
//#include "call.h"
//To change pins for Software Serial, use the two lines in GSM.cpp.
//GSM Shield for Arduino
//www.open-electronics.org
//this code is based on the example of Arduino Labs.
//Simple sketch to communicate with SIM900 through AT commands.
//InetGSM inet;
//CallGSM call;
//SMSGSM sms;
#include "inetGSM.h"
int numdata;
InetGSM inet;
char inSerial[40];
int i=0;
boolean started = false;
void setup()
{
     //Serial connection.
     Serial.begin(9600);
     Serial.println("GSM Shield testing.");
     //Start configuration of shield with baudrate.
     //For http uses is raccomanded to use 4800 or slower.
     if (gsm.begin(9600)) {
          Serial.println("\nstatus=READY");
          started=true;
     } else Serial.println("\nstatus=IDLE");
     if(started) {
          //GPRS attach, put in order APN, username and password.
          //If no needed auth let them blank.
          if (inet.attachGPRS("uinternet", "", ""))
               Serial.println("status=ATTACHED");
          else Serial.println("status=ERROR");
          delay(1000);
   
       Serial.println(" line 0001");
       gsm.SimpleWriteln("AT+EMAILCID=1");
   // Serial.println("AT+EMAILCID=1");
      delay(50000);
     
      gsm.SimpleWriteln("AT+EMAILTO=30");
// Serial.println("AT+EMAILTO=30");
      delay(500000);
      gsm.SimpleWriteln("AT+SMTPSRV='smtp.gmail.com','465' "); // stmp&port
  // Serial.println("AT+SMTPSRV='smtp.gmail.com','465' ");
      delay(50000);
      gsm.SimpleWriteln("AT+SMTPUTH=1,'user','password'");
 // Serial.println("AT+SMTPUTH=1,'user','password'");
      delay(50000);
     
      gsm.SimpleWriteln("AT+SMTPRCPT=0,0,'#######@gmail.com','NAME'");
 // Serial.println("AT+SMTPRCPT=0,0,'#######@gmail.com','NAME'");
      delay(50000);
      Serial.println("line 5");
      gsm.SimpleWriteln("AT+SMTPRCPT=1,0,'######@gmail.com','NAME'");
 // Serial.println("AT+SMTPRCPT=1,0,'#######@gmail.com','NAME'");
      delay(50000);
      gsm.SimpleWriteln("AT+SMTPRCPT=2,0,'#####@gmail.com','NAME'");
 // Serial.println("AT+SMTPRCPT=2,0,'#####@gmail.com','NAME'");
      delay(50000);
      gsm.SimpleWriteln("AT+SMTPSUB='TEST'");
  // Serial.println("AT+SMTPSUB='TEST'");
      delay(50000);
      Serial.println("line 8");
      gsm.SimpleWriteln("AT+SMTPBODY> HELLO WORLD  !! GPRS ARDUINO ");
   // Serial.println("AT+SMTPBODY> HELLO WORLD  !! GPRS ARDUINO ");
      delay(50000);
      gsm.SimpleWriteln("AT+SMTPSEND");
    // Serial.println("AT+SMTPSEND");
      delay(10000);
      Serial.println("finished");
     }
};
void loop()
{
        delay(10000);
        Serial.println("0003");
}