Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem Ansoft HFSS v9.2 an optimisation with

Status
Not open for further replies.

Vasily

Member level 2
Member level 2
Joined
Oct 14, 2001
Messages
52
Helped
1
Reputation
4
Reaction score
1
Trophy points
1,288
Visit site
Activity points
301
Hello

I have a big problem with Ansoft HFSS v9.2
I have tried to do an optimisation with
Optimetrics and after some iterrations,
the programm doesn't stop more!
I have look at all informations, but it doesn't realy work.
It is starting an itteration for the optimisation and it
doesn't finish the step, without message! The CPU is still 99%
used! Why?
 

Vasily said:
Hello

I have a big problem with Ansoft HFSS v9.2
I have tried to do an optimisation with
Optimetrics and after some iterrations,
the programm doesn't stop more!
I have look at all informations, but it doesn't realy work.
It is starting an itteration for the optimisation and it
doesn't finish the step, without message! The CPU is still 99%
used! Why?
I think, you need to install a HFSS 9.2 Service Pack.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top