Problem about start Design Analyzer.

[wangyuxin]

My Design Analyzer was untared from an early installed package,which including scl1.2 and design compiler. After careful checked my license file and bashrc file,i found both of them have no problem.But when i start DC by type "design_analyzer&",the following erroe appears:


[root@localhost da]# Unable to obtain feature 'Design-Analyzer-DAP ' because:
Error: This site is not licensed for 'Design-Analyzer-DAP'. (SEC-51)
Please contact yhzhu at ###-#### and/or user@email, who is
your local Synopsys license administrator for Synopsys site 000.
Unable to obtain feature 'Design-Analyzer ' because:
Error: This site is not licensed for 'Design-Analyzer'. (SEC-51)
Please contact yhzhu at ###-#### and/or user@email, who is
your local Synopsys license administrator for Synopsys site 000.
Unable to obtain feature 'Design-Vision ' because:
Error: This site is not licensed for 'Design-Vision'. (SEC-51)
Please contact yhzhu at ###-#### and/or user@email, who is
your local Synopsys license administrator for Synopsys site 000.
Fatal: At least one of the following must be enabled : Design-Analyzer-DAP, Design-Analyzer, Design-Vision. (DCSH-10)


what's wrong?could some kindly man help me on it?

 

[jizhongren]

Maybe your license file have problem,you must sure your license file have to be right about the Design-Analyzer-DAP or Design-Analyzer or Design-Vision.If your license file is right, you must right to start the license.

setenv LM_LICENSE_FILE your_license_file

Good luck!