Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem 56x192 LED Matrix

Status
Not open for further replies.
D

Divemen

Junior Member level 1
Junior Member level 1
Joined
Mar 12, 2002
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
86
Hello,

I have to build a LED Matrix for a large size display with 56x192 LED's.
This Matrix have to be split in 12 Modules a 14x64 LED.

All parts have to be SMD Parts.

I am thinking to use a uC with 100 pin count for each module and a basic module to send the data per master/slave spi.

The uC can be the Fujitsu MB90F438LS, cost 7,20 €.

How can I solve this Problem?

Any help and ideas will be appreciated.

Thank you all.

Divemen
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top