adinellu
Newbie level 1
- Joined
- Aug 31, 2015
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 6
Hello,
I want to use the SCA103T from Murata for an inclination application. What I need is an inclinometer with a precision of +/-0.03° on [-20; 60]°C. In the datasheet, on figure 4 and 6 there's a good average of the -3sigma and +3sigma. I am wondering if by taking a lot of samples for a measure and averaging them, I could be sure to be close to the average.
Thank you
I want to use the SCA103T from Murata for an inclination application. What I need is an inclinometer with a precision of +/-0.03° on [-20; 60]°C. In the datasheet, on figure 4 and 6 there's a good average of the -3sigma and +3sigma. I am wondering if by taking a lot of samples for a measure and averaging them, I could be sure to be close to the average.
Thank you