analog_fever
Junior Member level 3
I am trying to solve a problem in the Sergio Franco book.
The problem is to design a power supply monitor such that the output is a 0 (or 1) as long as the power supply stays within +/- 5% of a value. We need to use 3 comparators, a voltage reference, and resistors.
I tried thinking about this for some time, but could not get an architecture using 3 comparators.
The problem is to design a power supply monitor such that the output is a 0 (or 1) as long as the power supply stays within +/- 5% of a value. We need to use 3 comparators, a voltage reference, and resistors.
I tried thinking about this for some time, but could not get an architecture using 3 comparators.