Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PowerComplier shows global operating voltage is -1.049+e6?

Status
Not open for further replies.
W

wwfhm2002

Member level 5
Member level 5
Joined
Dec 7, 2003
Messages
83
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,288
Activity points
686
global operating voltage

I think the voltage should be 1v or 5v, but when I run "report_rtl_power" in pe_shell, which shows me the global operating voltage is -1.049+e6,
and the power unit is unitless, and internal/switch/leak power are 0.

Why? I use 2000.11 version and use libraries in synopsys root.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top