Mad I.D.
Member level 1
- Joined
- Aug 21, 2009
- Messages
- 35
- Helped
- 4
- Reputation
- 8
- Reaction score
- 1
- Trophy points
- 1,288
- Location
- Leuven, Belgium
- Activity points
- 1,506
Hi guys.
I'm trying to design a remote sense input to mitigate voltage drop on cable resistance. Since I must have resistance on high frequency to introduce damping factor and avoid ringing, the loop should reduce the impedance only on low frequencies (up to 1kHz).
It is strange I cannot find any literature on this. Of course I can design it by my self, but it's always good to see what others did on the same topic.
If you know any link or book on this topic, please share.
Thank you!
Ivan
I'm trying to design a remote sense input to mitigate voltage drop on cable resistance. Since I must have resistance on high frequency to introduce damping factor and avoid ringing, the loop should reduce the impedance only on low frequencies (up to 1kHz).
It is strange I cannot find any literature on this. Of course I can design it by my self, but it's always good to see what others did on the same topic.
If you know any link or book on this topic, please share.
Thank you!
Ivan