Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Power protection circuits

Status
Not open for further replies.
K

kiranholla

Newbie level 1
Newbie level 1
Joined
Aug 11, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,287
Hi,
I have a 24V to 12V regulator for which i need to provide:
1. Over voltage protection
2. Over current protection
3. Reverse voltage protection
4. Reverse current protection.

These protections have to be provided both at the input and out stages of the 24V to 12V regulator. Input current rating to the regulator is 29A and output current from the regulator is 50A. Please suggest me a circuit which can operate at such a high power ratings and consumes less power for the operation.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top