thaitam
Junior Member level 2
Hey
I was wondering if anybody knew much about POE.
https://pinouts.ru/Net/poe_pinout.shtml
this website gives me a pinout which is fine but I basically want to take the +voltage pin and alter the signal so i can effectively switch the power to the ethernet device on and off.
for example
IEEE 802.3af
using spare pairs
Is it like for example that pins 4 and 5 are at 48V whilst the vport negative (DC-) are at ground (0V)?
thanks
Thomas
I was wondering if anybody knew much about POE.
https://pinouts.ru/Net/poe_pinout.shtml
this website gives me a pinout which is fine but I basically want to take the +voltage pin and alter the signal so i can effectively switch the power to the ethernet device on and off.
for example
IEEE 802.3af
using spare pairs
Is it like for example that pins 4 and 5 are at 48V whilst the vport negative (DC-) are at ground (0V)?
thanks
Thomas