Hi
I am designing a 100w unipolar spwm(20kHz) inverter(H-Bridge), The dc link voltage will be 12 volts.
does anyone can help me what kind of (mosfet) and (gate driver) and also (optocoupler) should i use?
please give me device's code if it's possible.
Hi Farzam
You can easily use four IRFZ44 and an IR2110 as your driver . and if you need opto coupler ( i think you won't need ) i think 6n136 and 6n137 would be ok .
Best Wishes
Goldsmith