christophersid
Newbie level 5
- Joined
- Mar 23, 2012
- Messages
- 9
- Helped
- 3
- Reputation
- 6
- Reaction score
- 3
- Trophy points
- 1,283
- Activity points
- 1,331
Hi,
i am planning to design a PLC unit to control every device inside the building basically on/off and regulator control.Current options in front of me are
1.TI(AFE03+c2000 or any other DSP uc)
2.Maxim( max2992 +any DSP UC)
i am planning to use G3PLC protocol,please help me choose between my options ,Does we have to Code G3PLC PROCEDURE in AFE03 and MAX2992 or just raw data through SPI to these uc will serve the purpose,I mean the uc will send it according to G3PLC protocol;And please tell me real world difficulties with hardware. Any help will be really appreciated.
hopefully,
Sid
i am planning to design a PLC unit to control every device inside the building basically on/off and regulator control.Current options in front of me are
1.TI(AFE03+c2000 or any other DSP uc)
2.Maxim( max2992 +any DSP UC)
i am planning to use G3PLC protocol,please help me choose between my options ,Does we have to Code G3PLC PROCEDURE in AFE03 and MAX2992 or just raw data through SPI to these uc will serve the purpose,I mean the uc will send it according to G3PLC protocol;And please tell me real world difficulties with hardware. Any help will be really appreciated.
hopefully,
Sid