Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Power Consumption of basic standard cells for various technologies???

Status
Not open for further replies.

BB11

Member level 4
Member level 4
Joined
Jan 4, 2010
Messages
74
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
india
Activity points
1,828
Hello

I would like to make a comparison chart on power consumption and delay/performance for basic standard cells lik inverter, nand,nor, AOI-21, AOI22 for technoly nodes from 180nm to 22nm.

Could any one tell me where do I get the information for these technolgy nodes ASAP??

Thanks
 

I don't think you can get any of this information without signing an NDA either with a foundry or an IP company that has designed cells using the technologies you mentioned, especially anything below 65nm. You can probably check out academic papers that look into this issue but most of the layout assumptions and transistor model assumptions would not be very accurate.
 
  • Like
Reactions: BB11

    BB11

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top