sarge
Full Member level 3
- Joined
- Dec 29, 2009
- Messages
- 187
- Helped
- 57
- Reputation
- 114
- Reaction score
- 56
- Trophy points
- 1,308
- Activity points
- 2,170
Hi to all,
I'm trying to built simple power amplifier with cmos output. I need to calculate output power in tran analysis, usually I do it with dft function and rms value for signal.
For example for sinus we know:
\[P=\frac{V^2 }{2R }\]
Also, from wiki crest factor for rectangular waveform equal to 1.
Does it mean, that final equation for dft will be \[P=\frac{V^2}{R}\] ?
If so, what will happen if duty cycle isn't equal to 50% ?
I'm trying to built simple power amplifier with cmos output. I need to calculate output power in tran analysis, usually I do it with dft function and rms value for signal.
For example for sinus we know:
\[P=\frac{V^2 }{2R }\]
Also, from wiki crest factor for rectangular waveform equal to 1.
Does it mean, that final equation for dft will be \[P=\frac{V^2}{R}\] ?
If so, what will happen if duty cycle isn't equal to 50% ?