Below is the Attach file of Negative Boost using LM2576-12 having input of -5v and output of -12v.
If I want potsitive boost having input of +5v and output of +12v.Will I use same CKT for Positive Boost??
At the moment the schematic is 'upside down' so the output is ground and the ground is negative. Check the data sheet, I'm sure it will show it in positive boost configuration.
There are schematics in the data sheets of both devices.
The difference between the 2576 and 2577 is only in the way the switching works. The 2576 is a step down (buck) converter and the 2577 is a step up (boost) converter. Either can be positive or negative depending on how it is wired up.
As you want to increase your voltage, the 2577 is the one to use.
1)Its means LM-2576 can't be used for Postive boost +5v to +12v.Is their is any way so that I change my polarity from -12v to +12v using LM-2576.
2)If it would be can somebody guide how can I wired connection using LM-2576 To get +5V to +12v.
Kindly Assist me upon this??