Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Position data of moving module?

Status
Not open for further replies.

Analyzer

Full Member level 6
Full Member level 6
Joined
Nov 18, 2001
Messages
374
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
3,518
Hi,

I would like to get position data from a moving module.I'm using an rf transmitter module in my pc side and using a rf receiver module in my moving module side.So, how can i know where my moving module is in my room and/or outdoor?

Analyzer
 

Hi,
I have not done this, but here's some opinions. I think it will be impossible to retrieve full tridimensional position using only one transmitter and one receiver. You will have to use a system similar with GPS, but at a lower scale. Basically, GPS satelites are moving above the target, this is why complexe algorythm are required to obtain position. If you will use stationery transmitters, your work will be far easy. But you cannot do it, only with at least three transmitters. Basic principle of retrieving position by RF means is triangulation.

/pisoiu
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top