Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Porting RT Linux to 80486 based embedded system

Status
Not open for further replies.
V

VEM RnD

Newbie level 1
Newbie level 1
Joined
Apr 2, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
I need to port RT Linux to a 486-based embedded system that is configured with 2 Mb of Flash memory.

I have completed ISP of Flash over Serial (RS-422) link.

I request the forum to share its experience on the topic so that I can achieve my objective after which I can share my work on the topic.

I have configured a Monitor Program on EEPROM that Boots the 486 in Protected Mode. I intend to transfer control to the RT Linux kernel that would schedule specified tasks.

I wish to port RT Linux so as to improve the interrupt latency and to schedule tasks.

Thanks in anticipation

VEM RnD
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top