jianke
Member level 3
- Joined
- Oct 22, 2010
- Messages
- 55
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,764
Hi everyone,
I met a problem when I use HFSS's Driven Terminal to simulate a structure. It is a warning, "Fast sweep setup, process hf3d: Poor convergence in seeding data." My simulation setup is following,
Solution Frequency: 14.25GHz
- Adaptive Solutions
Maximum Number of: 20
Maximum Delta S: 0.02
- Adaptive Options
Maximum Refinement Per Pass: 30%
Minimum Number of Passes: 1
Minimum Converged Passes: 2
Can anyone give me any suggestions? Thank you!!!
I met a problem when I use HFSS's Driven Terminal to simulate a structure. It is a warning, "Fast sweep setup, process hf3d: Poor convergence in seeding data." My simulation setup is following,
Solution Frequency: 14.25GHz
- Adaptive Solutions
Maximum Number of: 20
Maximum Delta S: 0.02
- Adaptive Options
Maximum Refinement Per Pass: 30%
Minimum Number of Passes: 1
Minimum Converged Passes: 2
Can anyone give me any suggestions? Thank you!!!