Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

"Very weak" versus "high" current can be both forward active. I don't get your point. Saturation versus forward active has nothing to do with a specific current level, just B-C voltage difference.

Would be a good idea to post the complete circuit, part of it is cut.

[QUOTE="FvM, post: 1790482, member: 152255"] "Very weak" versus "high" current can be both forward active. I don't get your point. Saturation versus forward active has nothing to do with a specific current level, just B-C voltage difference. Would be a good idea to post the [B]complete [/B]circuit, part of it is cut. [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics