Dec 19, 2012 #1 D diaz080 Member level 4 Joined Oct 3, 2012 Messages 73 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,714 i have no idea about this LUT..need 2 design a 3 bit multiplier using this method..any help
Dec 19, 2012 #2 ads_ee Full Member level 6 Joined Oct 4, 2012 Messages 327 Helped 87 Reputation 176 Reaction score 86 Trophy points 1,308 Location San Diego Activity points 3,469 A multiplier using a Look Up Table with 3-bit inputs? Use the two inputs as an address to a memory and the data at each address is the multiplied value of the two inputs. -alan
A multiplier using a Look Up Table with 3-bit inputs? Use the two inputs as an address to a memory and the data at each address is the multiplied value of the two inputs. -alan
Dec 19, 2012 #3 D diaz080 Member level 4 Joined Oct 3, 2012 Messages 73 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,714 can u explain the steps..
Dec 19, 2012 #4 barry Advanced Member level 7 Joined Mar 31, 2005 Messages 6,484 Helped 1,205 Reputation 2,422 Reaction score 1,420 Trophy points 1,393 Location California, USA Activity points 35,287 You have a 6-bit input LUT. Lower 3 bits are multiplier; high 3 bits are multiplicand. Data at address 0 is 0 (0 x 0). Data at address 10(001010) is 2 (001 x 010). Data at address 27 (011011) is 9 (011 x 011) etc.
You have a 6-bit input LUT. Lower 3 bits are multiplier; high 3 bits are multiplicand. Data at address 0 is 0 (0 x 0). Data at address 10(001010) is 2 (001 x 010). Data at address 27 (011011) is 9 (011 x 011) etc.