snfvsd
Junior Member level 1
- Joined
- Sep 13, 2010
- Messages
- 16
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,419
Hi All,
First of all, I am not used to working with Global pins, and I am simulating someone else's design and trying to monitor the current draw in one of the subcells in the hierarchy. And have selected the current like shown in the schematic (see attachment), since the subcell symbol does not have power and ground pins. But I don't get any current saved in the resulting database.
Is there a trick that I am missing, or is this a limitation of using global pins for analog scehmatics?
First of all, I am not used to working with Global pins, and I am simulating someone else's design and trying to monitor the current draw in one of the subcells in the hierarchy. And have selected the current like shown in the schematic (see attachment), since the subcell symbol does not have power and ground pins. But I don't get any current saved in the resulting database.
Is there a trick that I am missing, or is this a limitation of using global pins for analog scehmatics?