Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Plexiglass display window (smoked glass)

Status
Not open for further replies.

Jester

Full Member level 6
Full Member level 6
Joined
Aug 18, 2012
Messages
377
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,298
Location
.
Activity points
4,754
Can anyone tell me where I can source display windows similar to this: **broken link removed**

I don't need the tabs, but if the window had some means to be mounted that would help. I'm somewhat flexible on the size about 1" tall and 7-8" wide. I will need at least 10 and likely a 100 or more.

I'm not sure how I'm going to mount it, I will need to figure that out.

Are these just plexiglass or some other type of plastic?
 

This could be thought of as tinted glass, to put in windows for dimming sunlight, preventing observation, etc. Or, available in large panels, perhaps in crafts stores, automotive parts stores, furniture stores, camera stores?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top