Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Please Review my Custom Voltage Power Bank

Status
Not open for further replies.

lganimys

Newbie level 2
Newbie level 2
Joined
Nov 3, 2019
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
12
Friends,

Please review my custom voltage lithium-ion power bank and send me your valuable comments and suggestions.

Below is the youtube link.

https://youtu.be/xeFokAu-39k

Thanks.
 

do you have cell balancing for the 4 "cells" i.e. if one "cell" goes too high or low you can shift current to the other cells or stop the battery from over charging / discharging ...?
 

do you have cell balancing for the 4 "cells" i.e. if one "cell" goes too high or low you can shift current to the other cells or stop the battery from over charging / discharging ...?

Yes. It has a BMS circuit and protection circuit for balancing, short circuit protection, high cutoff and low cutoff.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top