Dude Wake up.... read, understand and then please write... I was talking abt companies in USA and plz read the Topic subject -------->"Interview questions USA - VLSI, Analog, RF, IC design"
ATI interview for ASIC design position from my own experience in Canada (Should be similar to what they would ask in the US)
- simple logic questions that involved using gates to implement boolean equations, the only one I remember is B = 2*A
- write vhdl code for flip flip with synchronous reset
- implement 2 bit counter using a fsm, draw the circuit using D flip flops
- define setup time, hold time and clock skew, use a diagram
- Given a circuit with 2 d flip flops where the output of one flip flop goes through some combinational logic and ties into the input of the second flip flop, and the same clock is used for both flip flops. Derive the maximum clock frequency for the circuit. Derive the minimum hold time allowed for the circuit. If the hold time
- Explain the operation of a n-channel or p-channel CMOS transistor at the device level using a diagram
hi,
browse **broken link removed** for interview questions in vlsi, analog and rfic design. For some questions there is answers too.
some of the interview questions links are
**broken link removed** vlsi interview questions with answers
**broken link removed** RF design interview questions
**broken link removed** tips for preparing for your interview
**broken link removed** Good for telephonic interview in analog ic design
and some more links for understanding design techniques
I believe there are lots of sites you can find asic interview questions. I found these messages contain interesting questions: asic interview questions
Thanks very much for this comment. I was actually hired from another interview I had. I'm sure this thread will be useful for others though. please wait.