Please confirm one problem in ADS.

Status
Not open for further replies.
B

Berend Kunze

Newbie level 6
Joined
Feb 13, 2023
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
56
The result of examining the entrance resistance of the antenna with a network analyzer
It was 24.5+7.5j.
As a result of simulating in ADS to see the S11 characteristics of the antenna, accurate results do not come out.
What could be the cause? Please help.


 

Hi,

it's quite a while ago when I used ADS, so I'm not really familiar with it. I would expect quite a different solution based on the calculation of the reflection coefficient by S11 = (Zx - Z0)/(Zx + Z0), where Z0 = 50 Ohm.

Is L_3 in your circuit represented by an open-circuit?

BR
 
Thank you for your interest in my problem.
We fixed this issue today.
I am new to this site and have few friends.
I am a radio engineer and electrical engineer.
If there is a problem that needs to be solved in the future, I would like to solve it by connecting with each other.
thank you
 

Hi,

please share your solution, so other ones may benefit of it.

BR
 

Sorry, I joined here a few days ago, so I'm not familiar with face-to-face yet.
You're trying to make your needs come true, but it doesn't work out.
Please help me with some action.
 

Berend Kunze said:
If there is a problem that needs to be solved in the future, I would like to solve it by connecting with each other.
Click to expand...

Seriously? If you need personal support, sign up for ADS traininbg and ADS support. Both are payed services. The forum is meant to share information for the COMMUNITY, not to give YOU free personal support.

stenzer said:
please share your solution, so other ones may benefit of it.
Click to expand...

He replaced L3 by an open circuit (icon: deactivate) instead of shorting it (icon: deactivate and short).
 

Attachments

  • deactivate.png
    65.7 KB · Views: 165
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…