place & routing tool in PC

[andy2000a]

as I remember , snakeTech have cellsnake (gatesnake) for windows place&routing
standard cell . but cadence merge snakeTech already stop this tool.

Ledit support Place& routing called SPR(BPR) , but only support Tanner ledit format ,

my problem is , have any P&R tool can read verilog netlist in windows platform ??

our design only small digital cell , we don't need "expensive" P&R tool ,
but our digital RD use RTL coding , we only have verilog netlist .

Cadence composer can verilog-In (from verilog netlist to schmatic )
but Tanner Sedit can not read verilog .

I hope Tanner sedit can reading verilog netlist and convert to schmatic
-> output SPR format for ledit P&R

or use other tool convert verilog to SPR format ??

thanks

 

[Humungus]

I used Ledit and it worked fine. First you have to translate your Verilog netlist into EDIF format, then Ledit P&R can read it. Cadence can translate it as well as other schematic tools.