monty
Newbie level 1
I have several pixter monocrome toys that have a touch screen interface that I would like to use for other projects. The pins going to the display are labeled:
CP,DL3,DF,LD,FP,VLCD,VSS,VDD,DCK,VB,RW
These pins also appear to interface the touch screen also. The driver board has a "potted" chip which I suspect is a controller. If any one has any experience with these I would appreciate any help you can give me in developing an interface to these displays.
CP,DL3,DF,LD,FP,VLCD,VSS,VDD,DCK,VB,RW
These pins also appear to interface the touch screen also. The driver board has a "potted" chip which I suspect is a controller. If any one has any experience with these I would appreciate any help you can give me in developing an interface to these displays.