Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pixtar LCD display hack

Status
Not open for further replies.
M

monty

Newbie level 1
Newbie level 1
Joined
Mar 16, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
I have several pixter monocrome toys that have a touch screen interface that I would like to use for other projects. The pins going to the display are labeled:
CP,DL3,DF,LD,FP,VLCD,VSS,VDD,DCK,VB,RW

These pins also appear to interface the touch screen also. The driver board has a "potted" chip which I suspect is a controller. If any one has any experience with these I would appreciate any help you can give me in developing an interface to these displays.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top