Pic16f877a and interface to keypad and LCD in microbasic i want help

Status
Not open for further replies.
L

lina889

Member level 1
Joined
Aug 20, 2010
Messages
35
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
JORDAN
Activity points
1,557
hello everybody
am trying to connect LCD and keypad to PIC16f877a but after compile the code
and connect the schematic in Proteus when i Press on the keypad no out put on the LCD
i upload the micobasic program and the Proteus here
 

Attachments

  • Keypad test.rar
    53.4 KB · Views: 158

I can help you with this in assembly, if you may wish to opt for this.
 
You forgot to connect resistors from keypad lines to GND.

Regards
 

Californiajoe has given a good idea, but still its not working.

I think there is some mistake in ur code. I have downloaded the attachment, but it doesnot contain the (.PBP) file we have to check. It contains another file. PLZ attach the correct one so that i may be able to help u.

Regardz

Ayaz Ahmed
 

The way you have connected the keypad, it requires in the logic that you make one set of pins input ie A,B,C,D or 1,2,3,4 the other as output, make all out put low, make the output of the key in row/col as high then sense it with the corresponding input or row/col for high voltage. Do this for all rows/cols in a loop. Please check this it should work.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…