niz_se
Junior Member level 1
- Joined
- Jun 1, 2001
- Messages
- 16
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 76
Hi!
I have built a PIC-PG1 programmer (se https://www.olimex.com/dev/pic-pg1.html) and I have gone trough the design over and over, but it refuses to program my PIC16F870.
I belive that I´m short in voltage (about 10,5v for MCLR) so maybe its my serial port that is the problem.
Now, can anyone tell me how to check this with a multimeter?
What voltage on wich pin?
For the two zeners I used a BZX55/C6V2 and a BZX55/C5V1.
Please help me!
Regards!
I have built a PIC-PG1 programmer (se https://www.olimex.com/dev/pic-pg1.html) and I have gone trough the design over and over, but it refuses to program my PIC16F870.
I belive that I´m short in voltage (about 10,5v for MCLR) so maybe its my serial port that is the problem.
Now, can anyone tell me how to check this with a multimeter?
What voltage on wich pin?
For the two zeners I used a BZX55/C6V2 and a BZX55/C5V1.
Please help me!
Regards!