[SOLVED] PIC is not working under strange condition

Status
Not open for further replies.
jayanth.devarayanadurga said:
I had done a 433 MHz RF module based remote control. There was no issue of encoding or decoding data. Here is the video of it.
Click to expand...

Perhaps not if the TX and RX modules are within inches of each other.

However, if there is any significant distance between the pair and other RF emissions in the area, I can assure you there will be issues.

As noted by Korawy:

im using 434 MHz ASK module and it's similar to the picture, UART has a problem that will not make RF operate at a long distances.
Click to expand...


BigDog
 

jayanth.. the problem is not in the library, i know that i have to change(change) to set, im saying about testing the circuit in real, The Lights of the LEDs are going high(but their state is "0"), and it's not a total high, it's something of 2 or 3v.

About RF there's no any problem for me, it works fine.
 

This is half the circuit..



- - - Updated - - -

The power of BC547 is 5v
 

No, RA4 and RC0.

- - - Updated - - -

dealing with TMR0 and TMR1.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…