Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PIC Bootloader with Protection bit enabled.

Status
Not open for further replies.

rchadwick

Junior Member level 3
Junior Member level 3
Joined
Feb 22, 2002
Messages
25
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
212
rfarmer 16f87

I've heard rumors that some PIC chips can implement a boot loader while having the protection bit set. Anyone know if this exists? I'm using a 16F876.
 

As far as I remember, PIC16F87xA have self-programming with protection bit.
 

That's what I've heard...

But all the bootloaders I've found say they don't work with the protection bit set. Anyone know of a bootloader that works with the protection bit?
 

Pic Bootloader

Try this site it may be what your looking for.

**broken link removed**
 

It looks good, but...

I thought it was pretty much what I wanted, but then I noticed it was for the 18F series. Almost! I'm using the 16F8XX series. Know of any for that series?
 

Bootloader

I'm sorry I don't. Try talking to Martin and ask him if the firmware can be modified for the 16F8xx series.
 


Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top