yawijaya
Member level 2
- Joined
- Aug 18, 2009
- Messages
- 42
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- New Freedom, PA-USA
- Activity points
- 1,625
Hi,
I have 2 PICDEM FS USB demo board and am having a project in making a USB HID firmware for the board. There are some sample firmware from the latest microchip framework (v.2.5), and also one from Jan Axelson (lvr.com). Many of the firmware have claimed that they have been tested on the board i have. So I went on and compiled the one of the HID project using MPLAB IDE, and they compiled and built with no error. I then programmed the .HEX file to the board using the bootloader, and it also went smoothly. But after I reset the board, my laptop won't recognize it. Am i missing something over here? because I also tried with another project but none seems to work. Any help is appreciated! Thanks!
I have 2 PICDEM FS USB demo board and am having a project in making a USB HID firmware for the board. There are some sample firmware from the latest microchip framework (v.2.5), and also one from Jan Axelson (lvr.com). Many of the firmware have claimed that they have been tested on the board i have. So I went on and compiled the one of the HID project using MPLAB IDE, and they compiled and built with no error. I then programmed the .HEX file to the board using the bootloader, and it also went smoothly. But after I reset the board, my laptop won't recognize it. Am i missing something over here? because I also tried with another project but none seems to work. Any help is appreciated! Thanks!