Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PI filter for industrial controller board

Status
Not open for further replies.

anotherbrick

Full Member level 4
Full Member level 4
Joined
Jan 10, 2009
Messages
222
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Istanbul , Turkey
Activity points
3,190
hello dear forum ,

I want design a industrial controller board ( PLC like )
the board will run with external 24 VDC and max current drawn will be 1 Amper

I will put a PI filter at the power input to suppress unwanted EMI

I will use 2 x 100 nF for caps
I want ask what uH value must be the inductor ?

anyone who can share a practical info ?

thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top