appsee
Newbie level 3
The current mode control loop transfer function has a DC gain term that is proportional to Rout/Rsense.
I've seen datasheets often give the formula for Rout as
Rout = Vout/Iout.
What if the load is actually a current source with an output impedance of R_cur_src. In this case, would we continue to use:
Rout = Vout/Iout or
Rout = R_cur_src
I've seen datasheets often give the formula for Rout as
Rout = Vout/Iout.
What if the load is actually a current source with an output impedance of R_cur_src. In this case, would we continue to use:
Rout = Vout/Iout or
Rout = R_cur_src