edaenrico
Member level 4
- Joined
- Apr 19, 2010
- Messages
- 76
- Helped
- 10
- Reputation
- 20
- Reaction score
- 10
- Trophy points
- 1,288
- Activity points
- 1,864
Hi,
PREFACE
--------
I'm trying to understand if I this connector can be soldered using the ordinary Wave Soldering process:
http://www.digikey.com/product-detail/en/10018784-10210TLF/609-2029-ND/1002344
Here's the datasheet:
**broken link removed**
I don't understand the following point:
"2.6.2 Solder washers, AFCI part number 78523-001, shall be applied to the tails,
and the connector vapor phase reflowed at 215°C (419°F) for a time not to exceed 2 minutes."
QUESTION
----------
Can the connector can be soldered with the ordinary Wave Soldering Process?
Thanks,
Enrico Migliore
PREFACE
--------
I'm trying to understand if I this connector can be soldered using the ordinary Wave Soldering process:
http://www.digikey.com/product-detail/en/10018784-10210TLF/609-2029-ND/1002344
Here's the datasheet:
**broken link removed**
I don't understand the following point:
"2.6.2 Solder washers, AFCI part number 78523-001, shall be applied to the tails,
and the connector vapor phase reflowed at 215°C (419°F) for a time not to exceed 2 minutes."
QUESTION
----------
Can the connector can be soldered with the ordinary Wave Soldering Process?
Thanks,
Enrico Migliore