Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PCB RF transmission line simulation

Status
Not open for further replies.
R

RCwang

Newbie level 1
Newbie level 1
Joined
Sep 22, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
San Jose
Activity points
1,287
Hi All. Say I have a PCB layout with RF Microstrip traces on it. Although the Allegro PCB designer is able to show trace impedance (50ohm in my case) by certain stack-up and trace width, am I able to do sort of simulation and maybe check S11 for my layout before sending it to fab? If so, what kind of tools (ADS?) I can use and would you please kindly share some guidance documents with me?

Thank you very much.

Harry
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top