PCB Netlist create in orcad16.6

[sankar07]

I have Updated schematic But netlist is not create How Can slove this type of error


#1 ERROR(SPMHNI-175): Netrev error detected.

ERROR(SPMHDB-195): Error processing 'U31': Cannot modify element; the object or a parent has the FIXED property. [help]

 

[AmitThePCBGuy]

Follow these rules, if the error persists then ask again:
 Assigning Footprints to Your Components
 Generate a PCB Editor Netlist in OrCAD Capture
 Set Up PCB Design and Draw a Board Outline
 Create and Place Mechanical Symbols
 Place your components manually or automatically in OrCAD
 Set Up Differential Pairs and Constraint Manager
 Create Copper Plane and Shapes
 Start Routing and perform DRC checks
 Setup fab drawings, dimensioning, title block, drill tables, cross section, and more.
 Produce and export manufacturing data, including drill information, gerber output, assembly drawings, solder and paste masks, and other essential documentation.

 

[RushPCBUSA]

You have the board file SNB_PSB.brd open whilst trying to create / import the netlist into it. TRy closing PCB Editor down and trying again OR uncheck the Netrev section of the netlist generator and once generated import it manually in PCB Editor from File - Import - Logic

 

[ElectroMechanical]

in addition to what RushPCBUSA said, also verify u31 is not fixed by entering placement edit mode, and right clicking on the component

 

[Anonymous_Ricky]

Hi,

You can select "ignore fixed property" tab while importing netlist.

Regards