riscy00
Junior Member level 3
- Joined
- Oct 18, 2009
- Messages
- 26
- Helped
- 1
- Reputation
- 2
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Acle, Norwich
- Activity points
- 1,463
What is the generic Pad size rules for drilled hole of 0.6mm, 0.9mm, 1mm, 1.2mm?, in term of extreme minimum and standard. These size are based on what standard?
Is there cost difference between these minimum and standard is so, what is the % difference.
Assumed modern PCB vendor and 90% is SMD. (reflow). 4-6 layer FR4.
Is there cost difference between these minimum and standard is so, what is the % difference.
Assumed modern PCB vendor and 90% is SMD. (reflow). 4-6 layer FR4.