Pcb editor netlist import problem

Pls help to fix the problem

(---------------------------------------------------------------------)
( )
( Allegro Netrev Import Logic )
( )
( Drawing : ke-1206_connector_only.brd )
( Software Version : 16.5P002 )
( Date/Time : Fri Mar 08 17:08:08 2013 )
( )
(---------------------------------------------------------------------)


------ Directives ------

RIPUP_ETCH FALSE;
RIPUP_DELETE_FIRST_SEGMENT FALSE;
RIPUP_RETAIN_BONDWIRE FALSE;
RIPUP_SYMBOLS ALWAYS;
Missing symbol has error FALSE;
SCHEMATIC_DIRECTORY 'H:/KT_1206/Schematics/allegro/mURALI';
BOARD_DIRECTORY '';
OLD_BOARD_NAME 'H:/KT_1206/Schematics/allegro/mURALI/ke-1206_connector_only.brd';
NEW_BOARD_NAME 'H:/KT_1206/Schematics/allegro/mURALI/ke-1206_connector_only.brd';

CmdLine: netrev -$ -i H:/KT_1206/Schematics/allegro/mURALI -y 1 H:/KT_1206/Schematics/allegro/mURALI/#Taaaaaa04036.tmp

------ Preparing to read pst files ------


#1 ERROR(24) File not found
Packager files not found

#2 ERROR(102) Run stopped because errors were detected

netrev run on Mar 8 17:08:08 2013

COMPILE 'logic'
CHECK_PIN_NAMES OFF
CROSS_REFERENCE OFF
FEEDBACK OFF
INCREMENTAL OFF
INTERFACE_TYPE PHYSICAL
MAX_ERRORS 500
MERGE_MINIMUM 5
NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'
NET_NAME_LENGTH 24
OVERSIGHTS ON
REPLACE_CHECK OFF
SINGLE_NODE_NETS ON
SPLIT_MINIMUM 0
SUPPRESS 20
WARNINGS ON

2 errors detected
No oversight detected
No warning detected

cpu time 0:00:21
elapsed time 0:00:01

refer

https://www.cadence.com/Community/forums/p/18372/1261083.aspx

place all the dra files,psm files and other associate files of dra in the same directory of your brd file and import the netlist.....it will help you.....

Thanks Brother, it Worked

- - - Updated - - -

Thanks Brother , it worked