speedEC
Full Member level 6
- Joined
- Apr 1, 2011
- Messages
- 337
- Helped
- 23
- Reputation
- 46
- Reaction score
- 21
- Trophy points
- 1,298
- Activity points
- 4,324
Dear All,
When I try to disable (temporarily) all outgoing/incoming voice/data calls, the GSM module requires password to act ( I also tested on Mobile phone, it also required password). I didn't set any password for any lock/unlock facility. So, I tested sending AT command using blank password, it rejects.
The AT command I used to disable calls is:
AT+CLCK = "AI",1,"",1,1
"AI" -> ALL incoming calls
"1" -> lock
"" -> blank password
1 -> class - voice call
1-> status - active
Password should be obtained from Mobile Operator?
thanks
When I try to disable (temporarily) all outgoing/incoming voice/data calls, the GSM module requires password to act ( I also tested on Mobile phone, it also required password). I didn't set any password for any lock/unlock facility. So, I tested sending AT command using blank password, it rejects.
The AT command I used to disable calls is:
AT+CLCK = "AI",1,"",1,1
"AI" -> ALL incoming calls
"1" -> lock
"" -> blank password
1 -> class - voice call
1-> status - active
Password should be obtained from Mobile Operator?
thanks