Vermes
Advanced Member level 4
Supply assumptions
- shutters with their own motors with own SW limit off switches
- a local switch in every room plus a switch near the main door
- all hidden in wall – with only the display and control buttons outside
- all cables come to one place (even that one from the photoresistor)
- every shutter open/close information
- information from the photoresistor
- settings
- shutter steering
- opportunity to connect radio receiver and other sensors
Settings (press ok for 2 seconds)
- date and time
- on/off shutter steering from photoresistor
- on/off shutter “repeal” function (on set time)
- sensor calibration
- arrow up – opening
- arrow down – closing
- full rectangle – closed
- half full rectangle – repealed
- empty rectangle - opened
- opening, closing and stop – locally
- sending information from and to coils
- setting the time for opening each shutter
- setting on/off the option to repeal each shutter
- possibility to steer a shutter in the next room
- short pressing – opening/closing
- pressing in shutter work – stop, and next pressing work in the opposite direction
- longer pressing – running the shutter in the next room
The operation of closing/opening all shutters works sequentially – 200ms delay between shutters.
Link to original thread - Sterownik rolet zewnętrznych