Our MCU question paper

[PA3040]

Dear All
Our exam paper asked following question
1. Write 5 applications using Timer1
2. Write 5 applications using Timer2
3. Write 5 applications using Capture
4. Write 5 applications using Compare
5. Write 5 applications using PWM

I could only answered to question number 5

Please help for other and 5 too
This is related to PIC mid range family MCU's

Thanks in advance

 

[babar_ali]

Write 5 applications using Timer1

1. Asynchronous Clock Mode (read AN580)
2. Counter
3. Control the operation of electrical devices based on a programmed schedule (Simplest application is LED Blinking)
4. Delay (Timer Based)
5. Digital Clock

Write 5 applications using Timer 2
1. Color Sensor (using TCS230)
2. Delay (Timer Based)
3. Sonar Range finding
4. Triggering devices
5. Counter

Write 5 applications using Capture
1. Pulse detection
2. pulse width measurement (Square Wave)
3. frequency counter
4. One wire communication decoding
5. Rotary Encoders / RPM monitoring

Write 5 applications using Compare
1. Device triggering like (SRF05)
2. Special Event Trigger
3. High to low and low to high transition
4. Interrupt request without pin change

Write 5 applications using PWM
1. Speed Control (Motors)
2. Switch mode Power supply
3. Voltage regulation
4. Audio effects and amplification
5. Direct torque control
6. Relay Control
7. Generating an Analog Output (USING external RLC Components)

Enjoy!