Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

OrCAD simulation - multiple Parametric sweep

Status
Not open for further replies.
N

navbp

Junior Member level 1
Junior Member level 1
Joined
Aug 7, 2012
Messages
19
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,530
Hello,

I am trying to simulate a R-L circuit whose parameters varies based on temperature.
I need to simulate two parameters at two different temperatures.

At Temp T1, R = R1 and L = L1.
and at Temp T2, R = R2 and L = L2.

By using parameter sweep, I can simulate only one parameter at a time for its whole range.
Instead, Is it possible to simulate using two specific values for the given parameters?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top