OrCAD Pspice problem

[rathiot]

Hello everyone !
I have a problem that I encountered with Orcad Pspice. I made on Schematics bootstrap circle, but when I ran Pspice simulation the following problem appeared:


**** 07/06/15 17:35:52 ****** PSpice Lite (October 2012) ****** ID# 10813 ****

** Profile: "SCHEMATIC1-bootstrap" [ C:\OrCAD\OrCAD_16.6_Lite\tools\capture\bootstrapopit-PSpiceFiles\SCHEMATIC1\bootstrap.sim ]


**** CIRCUIT DESCRIPTION


******************************************************************************




** Creating circuit file "bootstrap.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS

*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Users\User\AppData\Roaming\SPB_16.6\cdssetup\OrCAD_PSpice/16.6.0/PSpice.ini file:
.lib "nomd.lib"

*Analysis directives:
.TRAN 0 1000ns 0 10ns
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"



**** INCLUDING SCHEMATIC1.net ****
* source BOOTSTRAPOPIT
R_R1 N01036 N00349 100k TC=0,0
R_R2 N00542 N00568 28k TC=0,0
R_R3 N00576 N000680 10k TC=0,0
R_R4 N000841 N00576 10k TC=0,0
R_R5 0 N00619 100k TC=0,0
R_R6 N00657 N00681 28k TC=0,0
C_C1 0 N00349 160 pF TC=0,0
---------------------------$
ERROR(ORPSIM-16015): Unknown parameter.
X_U1 N00349 N00619 N00530 N00538 N00576 AD820/AD
Q_Q1 N00542 N00568 N00530 Q40236
Q_Q2 N00657 N00681 N00538 Q40236
V_V1 N00542 0 35Vdc
R_R7 N00619 N00576 100k TC=0,0
C_C3 N00568 N00681 1n
V_V2 0 N00657 35Vdc
V_V3 N01036 0 DC 0Vdc AC 1.5Vac
D_D3 N00568 N000680 D1N3492
D_D4 N000841 N00681 D1N3492

**** RESUMING bootstrap.cir ****
.END


Does anybody know how can I fix the problem ?

P.S:
The Schematic circle is :
https://obrazki.elektroda.pl/1335766000_1436193629.png

 

[FvM]

Just a trivial typo.

160 pF isn't a valid capacitance value. Write 160pF instead.

 

[rathiot]

Thank you for the suggestion, you are right. But after that appeared another error :

ERROR(ORPSIM-15113): Model D1N3492 used by D_D3 is undefined

ERROR(ORPSIM-15113): Model D1N3492 used by D_D4 is undefined

ERROR(ORPSIM-15113): Model Q40236 used by Q_Q1 is undefined

ERROR(ORPSIM-15113): Model Q40236 used by Q_Q2 is undefined

ERROR(ORPSIM-15108): Subcircuit AD820/AD used by X_U1 is undefined

In other simulations I encountered the same error. Any ideas ?

 

[mvaseem]

This is because you are using demo version of software and the diode/bjt models you have in your design are not available in demo version.
See if you can replace them with the ones available with demo version. For ex- Instead of diode D1N3492 , try to use D1N3940, D1N4002 etc. Same for BJT.
These are available in eval.olb.