opto isolator for SPI communication

Status
Not open for further replies.
G

gehan_s

Member level 3
Joined
Aug 31, 2012
Messages
62
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
Sri Lanka
Visit site
Activity points
1,799
Hi all,

Can someone please suggest me a suitable opto-isolator for SPI communication. It should be cheap :grin: and thru-hole. This is to isolate a pic18f and a ade7758 ic. I am hoping to use a 4MHz crystal for the pic.

Thanks in advance !!!!!
 

Hi all,

Can someone please suggest me a suitable opto-isolator for SPI communication. It should be cheap and thru-hole. This is to isolate a pic18f and a ade7758 ic. I am hoping to use a 4MHz crystal for the pic.

Thanks in advance !!!!!
Click to expand...
Hi Gehan
So is that means that your communicated signal through this opto coupler is a 4MHZ signal ?can you tell me a bit more about your required specifications ?
Best Wishes
Goldsmith
 

hey thanks goldsmith,

actually the 4MHz is the pic's clock input (to pins OSC1 and OSC2). the clock frequency for SPI communication will be derived from that, eg - fosc/4,fosc/16,fosc/64. what frequency would you suggest (i was thinking of using fosc/4 which in my case is 1MHz). the main concern is finding an opto to operate in these frequencies. (i have some JC817 with me but haven't tested them yet)

thanks !!!!!!!!!!!!
 
Use PC817, it is cheap as well as it will fullfill your isolation requirement for SPI.
 
Use PC817, it is cheap as well as it will fullfill your isolation requirement for SPI.
Click to expand...
Hi again
There are several options available for this aim . e.g 6n137 or LTV817 or .. etc
Best Wishes
Goldsmith
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…