Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Operation of MCB shunt tripping module

Status
Not open for further replies.
mahesXtremeEngineering

mahesXtremeEngineering

Advanced Member level 4
Full Member level 1
Joined
Dec 17, 2011
Messages
103
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,832
How does the shunt tripping module for MCB works.
Has anyone disassembled one
 
Last edited by a moderator:

You don't need to disassemble it to know how it works.

Some MCB series have a mechanical interface for auxiliary modules, either signal contacts or external actuators. Shunt tripping module is just a solenoid coil driving this interface.

Depending on the MCB series, the interface is either through a lateral opening or to MCB handle. Review MCB catalogs and datasheets for details.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top