OPENOCD SRST and TRST are not connected

[alzomor]

Hi

I am using OPENOCD for debugging my board the problem is that SRST and TRST
are not connected on my board.
How Should I configure the reset_config command?

Salam
Hossam Alzomor

 

[amraldo]

You will need to assign none to the signals variable.
--
Amr Ali

 

[alzomor]

Asslamo 3alikom

Thanks AMR
This is exactly what I have did.
and in order to Reset the board I reset the PC to the reset address.
on the other hand I am thinking of using the WDT to make a real reset


Salam
Hossam Alzomor

 

[amraldo]

SRST is equivalent to system wide reset. It actually depends on how the SRST was connected to your board components. A simpler way is to press reset button on the board.

TRST is not a problem at all. Hoping that SRST handles it as well.
--
Amr Ali