Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

One chip solution for a 100Mbit ethernet interface for 68332

Status
Not open for further replies.

HugoRatlos

Member level 2
Member level 2
Joined
Oct 15, 2001
Messages
50
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Location
good old europe
Activity points
322
uP 68332 with ethernet ?

Hello
we work with 68332 single board system and there is the need to equip this system with a 100Mbit ethernet interface.

the system is working near full capacity.
one solution is to build a second processor to handel ethernet communication .

is there any cheap integrated one chip solution to do this?

Thx hugo
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top